ngwaahịa

Ngwaahịa

  • Coaxial Isolator

    Coaxial Isolator

    RF coaxial isolator bụ ngwaọrụ na-agafe agafe eji kewapụ akara na sistemụ RF.Isi ọrụ ya bụ ịnyefe akara nke ọma ma gbochie ntụgharị uche na nnyonye anya.Isi ọrụ nke RF coaxial isolators bụ ịnye ọrụ iche na nchekwa na sistemu RF.Na sistemu RF, enwere ike iwepụta ụfọdụ akara ngosi, nke nwere ike inwe mmetụta na-adịghị mma na arụ ọrụ nke sistemu.RF coaxial isolators nwere ike ikewapụ akara ngosi ndị a na-egosipụta nke ọma ma gbochie ha itinye aka na nnyefe na nnabata nke mgbaama.

    Ụkpụrụ ọrụ nke RF coaxial isolators dabeere na omume na-apụghị ịgbagha agbagha nke oghere magnetik.Ihe ndọta dị n'ime isolator na-amịkọrọ ma na-atụgharị ike ndọta ike nke mgbama a na-egosipụta, na-atụgharị ya ka ọ bụrụ ike ọkụ maka mgbasa, si otú ahụ na-egbochi mgbaàmà ahụ gosipụtara ịlaghachi na isi iyi.

  • Wepu na Isolator

    Wepu na Isolator

    A na-ejikọta ihe dịpụrụ adịpụ nke Drop-in na ngwá ọrụ site na sekit rịbọn.Ọtụtụ mgbe, ogo ikewapụ nke otu Drop-in isolator dị gburugburu 20dB.Ọ bụrụ na achọrọ ogo kewapụ elu dị elu, enwere ike iji ndị na-ekewapụta okpukpu abụọ ma ọ bụ multi junction iji nweta ogo kewapụ dị elu.Ọgwụgwụ nke atọ nke Drop-in isolator ga-enwe mgbawa attenuation ma ọ bụ resistor RF.Ihe dịpụrụ adịpụ nke Drop-in bụ ngwaọrụ nchebe eji na sistemụ ugboro redio, onye isi ọrụ ya bụ ịnyefe akara n'ụzọ ọ bụla iji gbochie akara njedebe antenna ịlaghachi azụ na njedebe ntinye.

  • Broadband Isolator

    Broadband Isolator

    Mgbasa mgbasa ozi bụ ihe dị mkpa na sistemụ nkwukọrịta RF, na-enye ọtụtụ uru na-eme ka ha dabara nke ọma maka ngwa dị iche iche.Ndị na-ekewapụ ndị a na-enye mkpuchi brọdband iji hụ na arụmọrụ dị mma n'ofe ogologo oge.Site n'ikike ha ikewapụ akara, ha nwere ike igbochi ndabichi pụọ na akara band ma jikwaa iguzosi ike n'ezi ihe nke akara band.

    Otu n'ime uru ndị dị na brọdband isolators bụ ọmarịcha arụmọrụ ikewapụ ha dị elu.Ha na-ekewapụta mgbaàmà nke ọma na njedebe antenna, na-ahụ na mgbaàmà na njedebe antenna adịghị egosipụta n'ime usoro ahụ.N'otu oge ahụ, ndị na-ekewapụ onwe ha nwere ezigbo àgwà ebili mmiri na-eguzo n'ọdụ ụgbọ mmiri, na-ebelata akara ngosi na-ejigide mgbasa ozi kwụsiri ike.

  • Abụọ Junction Isolator

    Abụọ Junction Isolator

    Ihe dịpụrụ adịpụ okpukpu abụọ bụ ngwaọrụ na-agafe agafe nke a na-ejikarị na ngwa ndakwa nri na igwe milimita iji kewapụ akara ngosi na njedebe antenna.Ihe mejupụtara ya bụ nhazi nke ndị mmadụ abụọ.Mfu ntinye ya na ikewapụ ya na-abụkarị okpukpu abụọ karịa otu onye kewapụrụ ya.Ọ bụrụ na mwepu nke otu isolator bụ 20dB, ikewapụ onye na-ahụ maka ihe mgbochi abụọ nwere ike bụrụ 40dB.Ebili mmiri na-eguzo n'ọdụ ụgbọ mmiri anaghị agbanwe nke ukwuu.

    N'ime usoro ahụ, mgbe a na-ebunye mgbama redio ugboro ugboro site na ọdụ ụgbọ mmiri ntinye gaa na mgbanaka mbụ, n'ihi na otu njedebe nke mgbanaka mbụ nwere ihe mgbochi redio, enwere ike ibunye mgbaàmà ya na njedebe ntinye nke abụọ. mgbanaka nkwụsị.Njikọ aka nke abụọ bụ otu ihe ahụ dị ka nke mbụ, na-arụnye ndị na-emegide RF, a ga-ebufe mgbaàmà ahụ n'ọdụ ụgbọ mmiri na-emepụta ihe, na ikewapụ ya ga-abụ nchikota nke mwepu nke njikọ abụọ ahụ.Mgbama egosipụtara na-alọta site n'ọdụ ụgbọ mmiri mmepụta ga-abụ nke RF resistor na mgbanaka nke abụọ.N'ụzọ dị otú a, a na-enweta oke dịpụrụ adịpụ n'etiti ọdụ ụgbọ mmiri ntinye na ntinye, nke ọma na-ebelata ntụgharị uche na nnyonye anya na usoro.

  • SMD Isolator

    SMD Isolator

    SMD isolator bụ ngwaọrụ dịpụrụ adịpụ ejiri maka nkwakọ ngwaahịa na ntinye na PCB (bọọdụ sekit e biri ebi).A na-eji ha eme ihe n'ọtụtụ ebe na sistemụ nkwukọrịta, akụrụngwa microwave, akụrụngwa redio, na mpaghara ndị ọzọ.Ndị na-ekewapụ SMD dị obere, dị fechaa ma dị mfe ịwụnye, na-eme ka ha dabara maka ngwa sekit agbakwunyere njupụta dị elu.Ndị na-esonụ ga-enye nkọwa zuru ezu maka njirimara na ngwa nke ndị na-ekewa SMD.

    Nke mbu, ndị kewapụrụ SMD nwere ikike mkpuchi mkpuchi ugboro ugboro.Ha na-ekpuchikarị ọtụtụ ugboro, dị ka 400MHz-18GHz, iji mezuo ihe achọrọ ugboro ugboro nke ngwa dị iche iche.Ike mkpuchi mkpuchi ugboro ugboro a na-enyere ndị na-ekewa SMD aka ịrụ ọrụ nke ọma n'ọtụtụ ọnọdụ ngwa.

  • Microstrip Isolator

    Microstrip Isolator

    Ndị na-ekewapụta microstrip bụ ngwa RF na ngwa ngwa ngwa a na-ejikarị maka mgbasa ozi na ikewapụ na sekit.Ọ na-eji teknụzụ ihe nkiri dị gịrịgịrị mepụta sekit n'elu magnetik ferrite na-atụgharị, wee gbakwunye oghere ndọta iji nweta ya.Echichi nke microstrip isolators n'ozuzu nakweere usoro nke akwụkwọ ntuziaka soldering nke ọla kọpa ibe ma ọ bụ ọla edo bonding.Ọdịdị nke microstrip isolators dị nnọọ mfe, ma e jiri ya tụnyere coaxial na agbakwunyere isolators.Ihe dị iche iche pụtara ìhè bụ na ọ dịghị oghere, na onye na-eduzi microstrip isolator na-eme ya site na iji usoro ihe nkiri dị mkpa (ntụgharị agụụ) iji mepụta ụkpụrụ a haziri na rotary ferrite.Mgbe electroplating gasịrị, a na-ejikọta onye nduzi a na-emepụta na rotary ferrite substrate.Tinye akwa mkpuchi mkpuchi n'elu eserese ahụ, ma dozie oghere magnetik na ọkara.Site na usoro dị mfe dị otú ahụ, a rụpụtala ihe mgbochi microstrip.

  • Waveguide Isolator

    Waveguide Isolator

    Onye kewapụrụ waveguide bụ ngwaọrụ na-agafe agafe ejiri na RF na ngwa ngwa ngwa ngwa iji nweta nnyefe otu na ikewapụ akara.Ọ nwere njirimara nke nkwụsị ntinye dị ala, oke dịpụrụ adịpụ, na brọdband, a na-ejikwa ya na nkwurịta okwu, radar, antenna na usoro ndị ọzọ.

    Nhazi ntọala nke waveguide isolators gụnyere ahịrị nnyefe waveguide na ihe ndọta.Ahịrị nnyefe na-efegharị efegharị bụ ọkpọkọ ígwè nwere oghere nke a na-ebufe akara.Ihe ndọta na-abụkarị ihe ferrite etinyere n'ebe a kapịrị ọnụ na ahịrị nnyefe waveguide iji nweta ikewapụ akara.Ihe dịpụrụ adịpụ nke waveguide tinyekwara akụrụngwa inyeaka na-ebu ibu iji bulie arụmọrụ yana belata ntụgharị uche.

  • Coaxial Circulator

    Coaxial Circulator

    Coaxial circulator bụ ngwaọrụ na-agafe agafe nke ejiri na RF na ngwa ngwa ngwa ngwa, nke a na-ejikarị ya na iche, njikwa ntụzịaka na ngwa nnyefe mgbaàmà.Ọ nwere njirimara nke nkwụsị ntinye dị ala, oke dịpụrụ adịpụ, na bandwit obosara, a na-ejikwa ya na nkwurịta okwu, radar, antenna na usoro ndị ọzọ.

    Nhazi nke mgbasa ikuku coaxial nwere njikọ coaxial, oghere, onye na-eduzi ime, ihe ndọta na-atụgharị ferrite, na ihe ndọta.

  • Wepu na Circulator

    Wepu na Circulator

    RF agbakwunyere okirikiri bụ ụdị ngwaọrụ RF na-enyere aka nnyefe nke ebili mmiri eletrọnịkị n'otu n'otu, nke a na-ejikarị na radar na sistemụ nzikọrịta ozi igwe onyonyo ọtụtụ ọwa.A na-ejikọta ihe dịpụrụ adịpụ agbakwunyere na akụrụngwa akụrụngwa site na sekit rịbọn.

    Igwe nfesa RF agbakwunyere bụ nke ngwaọrụ microwave ọdụ ụgbọ mmiri 3 ejiri ejikwa ntụzịaka na nnyefe nke mgbaama na sekit RF.Igwe okirikiri RF agbakwunyere bụ nke na-enweghị isi, na-enye ohere ka ebufe ike n'aka elekere site na ọdụ ụgbọ mmiri ọ bụla gaa n'ọdụ ụgbọ mmiri na-esote.Ndị na-ekesa RF ndị a nwere ogo kewapụrụ ihe dị ka 20dB.

  • Broadband Circulator

    Broadband Circulator

    Broadband Circulator bụ akụkụ dị mkpa na sistemu nkwukọrịta RF, na-enye ọtụtụ uru na-eme ka ọ dabara nke ọma maka ngwa dị iche iche.Ndị Circulators ndị a na-enye mkpuchi brọdband, na-ahụ maka ịrụ ọrụ dị mma n'ofe oke ugboro.Site n'ikike ha ikewapụ akara, ha nwere ike igbochi ndabichi pụọ na akara band ma jikwaa iguzosi ike n'ezi ihe nke akara band.

    Otu n'ime uru bụ isi nke ndị na-ekesa brọdband bụ arụmọrụ ikewapụ ha dị oke mma.N'otu oge ahụ, ngwaọrụ ndị a yiri mgbanaka nwere ezigbo njiri mara ọdụ ụgbọ mmiri, na-ebelata akara ngosi na idowe mgbasa ozi kwụsiri ike.

  • Dual Junction Circulator

    Dual Junction Circulator

    Circulator okpukpu abụọ bụ ngwaọrụ na-agafe agafe nke a na-ejikarị na ngwa ndakwa nri na igwe milimita ugboro ugboro.Enwere ike kewaa ya ka ọ bụrụ ndị na-ekesa ikuku coaxial junction yana ndị na-ekesa okirikiri agbakwunyere.Enwere ike kewaa ya n'ime ọdụ ụgbọ mmiri anọ nke ọdụ ụgbọ mmiri abụọ na ọdụ ụgbọ mmiri okpukpu abụọ na-adabere na ọnụ ọgụgụ ọdụ ụgbọ mmiri.Ọ mejupụtara nchikota nke ihe owuwu anular abụọ.Mfu ntinye ya na ikewapụ ya na-abụkarị okpukpu abụọ karịa otu Circulator.Ọ bụrụ na ogo ikewapụ nke otu Circulator bụ 20dB, ogo ikewapụ nke Circulator okpukpu abụọ nwere ike iru 40dB.Otú ọ dị, ọ dịghị mgbanwe dị ukwuu na ọdụ ụgbọ mmiri na-eguzo.

    Njikọ ngwaahịa Coaxial bụ ụdị SMA, N, 2.92, L29, ma ọ bụ DIN.A na-ejikọta ngwaahịa agbakwunyere site na iji eriri rịbọn.

  • SMD Circulator

    SMD Circulator

    SMD elu ugwu Circulator bụ ụdị ngwaọrụ yiri mgbanaka ejiri maka nkwakọ na ntinye na PCB (bọọdụ sekit e biri ebi).A na-eji ha eme ihe n'ọtụtụ ebe na sistemụ nkwukọrịta, akụrụngwa microwave, akụrụngwa redio, na mpaghara ndị ọzọ.The SMD elu ugwu Circulator nwere àgwà nke ịbụ kọmpat, fechaa, na mfe ịwụnye, na-eme ka ọ dabara maka ngwa sekit agbakwunyere njupụta dị elu.Ndị na-esonụ ga-enye nkọwa zuru ezu maka njirimara na ngwa nke SMD surface mount Circulators.

    Nke mbu, SMD elu ugwu Circulator nwere ikike mkpuchi mkpuchi ugboro ugboro.Ha na-ekpuchikarị ọtụtụ ugboro, dị ka 400MHz-18GHz, iji mezuo ihe achọrọ ugboro ugboro nke ngwa dị iche iche.Ike mkpuchi mkpuchi ugboro ugboro a na-enyere SMD elu ugwu Circulators aka ịrụ nke ọma n'ọtụtụ ọnọdụ ngwa.

1234Ọzọ >>> Peeji nke 1/4